SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
63
IP Filtering - Outgoing
On this page, you can add an outgoing filter when refusal of data transmitted from the LAN to the WAN is desired.
1. In the left navigation bar, click
Advanced Setup
>
Security
>
IP Filtering
and then click
Add
. The following page appears.
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit the completed entry.
The fields on this page are explained in the following table.
Field Name
Description
Filter Name
Enter a descriptive name for this filter.
IP Version
For the filter to be configured and effective for IPV6 , the gateway must be installed on a net-
work that is either a IPV6-only network (with that protocol enabled) or is both IPV4 and IPV6 dual
protocol enabled/configured. Options are
IPv4
and
IPv6
. The default is
IPv4
.
If you select
IPV6
, both the Source and Destination IP address must be specified in IPV6 format.
The following is an IPV6-compliant, hexadecimal address:
2001:0DB8:AC10:FE01:0000:0000:0000:0001.
Protocol
Select the protocol profile for the filter you are defining. TCP/UDP is most commonly used. The
options are
TCP/UDP
,
TCP
,
UDP
, and
ICMP
.
Source IP
Enter the source IP address of a LAN side host for which you wish to filter/block outgoing traffic
