SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
135
2. Complete the necessary fields per the instructions from your ACS platform vendor.
The fields on this page are explained in the following table.
Field Name
Description
Inform
Select whether to disable this function.
Inform Interval
Enter the frequency (in seconds) at which the CPE (gateway) checks in with the ACS to
sync and exchange data. A typical production environment has CPEs informing to the ACS
once/day or every 86,400 seconds.
ACS URL
Enter the URL for the CPE to connect to the ACS using the CPE WAN Management Pro-
tocol. This parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL
indicates that the ACS supports SSL. The "host" portion of this URL is used by the CPE for
validating the certificate from the ACS when using certificate-based authentication.
You can include a port specification suffix if your ACS platform requires it, e.g., http://-
customer.acs.wanmanagmentservices.com:30005 where 30005 is the port number. The
default port is
30005
.
ACS User Name
Enter the user name by which this gateway logs in to the ACS. This is usually "admin".
ACS Password
Enter the password to authenticate the above user name. This is usually "admin".
WAN Interface used by
TR-069 client
Select any WAN, LAN, Loopback or configured connection to identify how this gateway
will connect to the ACS.
Display SOAP messages
on serial console
Select whether to enable the display of messages on consoles.
3. (
Optional
) To configure the modem client Connection Request mechanism used by your ACS for communication with sub-
scriber gateways, click
Connection Request Authentication
. Additional fields appear.
Note:
Consult with your ACS vendor for any specific connection request requirement impacted by the following settings.
Field Name
Description
Connection Request User-
name
Enter the user name by which this gateway authenticates the ACS. For example,
many ACS platforms use “admin” or “tr069”.
Connection Request Pass-
word
Enter the password by which this gateway will authenticate to the ACS.
Connection Request Port /
URL
There is typically no need to set the Connection Request URL as it is normally estab-
lished automatically based on the effective WAN IP. The port can be configured if
needed. An example value might be "http://xxx.xxx.xxx.xxx:30005/" where the xxx
values are specific WAN IP octet numbers.
The default port value is
30005
.
