SMART/RG SR506n User Manual Download Page 28

Page: 28 / 157

Field Name

Description

Minimum Cell

Rate

Minimum allowable rate (cells per second) at which cells can be sent on a ATM network. The

default is

-1

(no shaping).

Scheduler for

Queues of Equal

Precedence as

the Default

Queue

The algorithm used to schedule the queue behavior. VC scheduling is different than the default

queues. Options are:

Weighted Round Robin:

Packets are accessed in a round robin style. Classes can be

assigned.

Weighted Fair Queuing:

Packets are assigned to a specific queue.

Default Queue Weight:

The default weight of the specified queue. Options are

Default Queue Precedence:

The precedence of the specified group. Options are

VC WRR Weight

: The weight of the specified virtual channel queue. Options are

VC Precedence

: The priority of the specified virtual channel queue. Options are

PTM Interface

The SmartRG gateway's VDSL2 standards support Packet Transfer Mode (PTM). An alternative to ATM mode, PTM transports packets

(IP, PPP, Ethernet, MPLS, and others) over DSL links. For more information, refer to the IEEE802.3ah standard for Ethernet in the First

Mile (EFM). Some 500 series gateways have a PTM interface configured by default.

On this page, you can configure a PTM interface for your gateway.

1. In the left navigation bar, click

Advanced Setup

Layer2 Interface

PTM Interface

and then click

Add

. The following page

appears.

Summary of Contents for SR506n




























































































































































Search results

Summary of Contents for SR506n

Reviews:

Related manuals for SR506n

Brands by name

Popular brands

SMART/RG SR506n, User Manual

Search results

Summary of Contents for SR506n

Reviews:

Related manuals for SR506n

Brands by name

Popular brands