SMART Embedded Computing COMX-CORE-2610-ET, Installation And Use Manual

Page: 74 / 92

74 COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS
Advance Menu
Table 5-16 IGD Configuration
Field Description
IGD - Boot Type
Select the video device activated which will be activated during POST.
This has no effect if external graphics present. Secondary boot display
selection will appear based on your selection. VGA modes will be sup-
ported only on primary display. CRT is for Onboard VGA, EFP is for
Integrated Display port, LFP is for Internal LVDS/eDP, CRT2 is for
SDVO to VGA transition device, EFP2 is for Integrated HDMI, Default
setting is CRT.
IGD - Secondary Boot
Type
Select secondary display device. CRT is for Onboard VGA, EFP is for
Integrated Display port, LFP is for Internal LVDS/eDP, CRT2 is for
SDVO to VGA device, EFP2 is for Integrated HDMI, Default setting is
LFP.
IGD - LCD Panel Type
Select the video device which will be activated during POST. This has
no effect if external graphics are present. Default setting is 1024 x 768
LVDS Color Panel.
IGD - Active LFP Select the active LFP configuration. Default setting is Int-LVDS.
Panel Color Depth Select the LFP panel color depth, Default setting is 24 Bit.
Table 5-17 South Bridge Configuration
Field Description
State After G3
Specify what state to switch to when power is re-applied after a power
failure (G3 State). Default setting is State S0.
LID# Function Enable or Disable LID# function, Default setting is Disabled.
Sleep# Function Enable or Disable Sleep# function, Default setting is Disabled.
Onboard TPM Enable or Disable Onboard TPM module. Default setting is Enabled.
SB USB Config Set USB configuration.
SB Azalia Config Set HD Audio configuration.