SMART Board SMART Board X800i5, Configuration And User'S Manual

Page: 72 / 100

Submenu setting Description
Degamma Adjusts the color performance of the display from 0 to 3.
Color Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colors on
the projector from 0 to 100 to provide custom color and luminance
output. Each color has a default value of 100. Adjustments to the
color settings register to the User mode.
Auto Signal Detect Enables or disables signal searching of input connectors.
l
Select On to have the projector continuously switch inputs until
it finds an active video source.
l
Select Off to maintain signal detection in one input.
Lamp Reminder Select On to show or Off to hide the lamp replacement reminder when
it appears. This reminder appears 100 hours before the recommended
lamp replacement.
Lamp Mode Adjusts lamp brightness to Standard or Economy . Standard
displays a high-quality, bright image. Economy increases the lamp
life by decreasing the brightness of the image.
Auto Power Off Sets the length of the auto power off countdown timer between 1 and
240 minutes. The timer begins to count down when the projector no
longer receives a video signal. The timer finishes when the projector
enters Standby mode. Select 0 to turn off the timer.
Zoom Adjusts the zoom to the center of the image in or out from
0 to 30.
H-position (RGB input) Moves the projected image’s horizontal position left or right from 0 to
100.
V-position (RGB input) Moves the projected image’s vertical position up or down from -5 to 5.
Aspect Ratio Adjusts the image output to Fill Screen , Match Input or 16:9 .
l
Fill Screen produces an image that fills the entire screen by
stretching and scaling.
l
Match Input matches the projector’s aspect ratio to the input’s
aspect ratio. As a result, black bands might appear along the
top and bottom edges of the screen horizontally (letterbox
format) or along the left and right edges of the screen vertically
(pillarbox format).
l
16:9 changes the output to 16:10 by letterboxing the image,
which is recommended for use with HDTV and DVDs
enhanced for wide-screen television.
N
N O T E
See Video format compatibility on page 29 for appearance
descriptions in each mode.
Startup Screen Sets the type of startup screen to SMART or User . The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.
A P P E N D I X A
Remotely managing your interactive whiteboard system
62