SMART Board SMART Board X800i5, Configuration And User'S Manual

Page: 36 / 100

N
N O T E
Low Power mode reduces your interactive whiteboard system’s power consumption when it is in
Standby mode.
To set the projector system to enter Low Power mode automatically whenever it enters Standby
mode, hold down the Power and Input buttons at the same time for five seconds. After five
seconds, the Power button blinks amber for two seconds to indicate that Low Power mode is
enabled.
The following diagram and table describe the components of the ECP.
Number Function
Left side
1 USB A receptacle (for USB drives)
Front
2
Power button and status indicator light
3 Volume control
4 Input selection
Back
5 Two mini USB B receptacles (connect to room computer and laptop)
6 11-pin connector (connects to ECP harness cable)
7 4-pin connector (for room control)
N
N O T E
The 4-pin connector cable is an optional accessory that you can order from your authorized SMART
reseller ( smarttech.com/wheretobuy ).
C H A P T E R 3
Using your interactive whiteboard system
26