SMART Board SMART Board X800i5, Configuration And User'S Manual

Page: 43 / 100

SMART UF75 projector
Video mode Aspect ratio Horizontal
frequency (kHz) Vertical
frequency (Hz) Color signal
(MHz)
NTSC 4:3 15.73 29.96 3.58
PAL 4:3 15.62 25 4.43
SECAM 4:3 15.62 25 4.25 (f
ob
)
4.06 (f
or
)
SMART UF75w projector
Video mode Aspect ratio Horizontal
frequency (kHz) Vertical
frequency (Hz) Color signal
(MHz)
NTSC 4:3 15.73 59.94 3.58
PAL 4:3 15.63 50 4.43
SECAM 4:3 15.63 50 4.25 and 4.41
PAL-M 4:3 15.73 59.94 3.58
PAL-N 4:3 15.63 50 3.58
PAL-60 4:3 15.73 59.94 4.43
NTSC 4.43 4:3 15.73 59.94 4.43
Connecting peripheral sources and outputs
Follow these instructions if you have a peripheral device to temporarily connect to your interactive
whiteboard system.
N
N O T E S
l
Measure the distance between the projector and the peripheral device you want to connect.
Make sure each cable is long enough, has plenty of slack and can be placed safely in your
room without presenting a trip hazard.
l
Do not disconnect cables from the ECP to connect peripherals because you could
disconnect controls for your interactive whiteboard or host computer.
l
Don’t connect SMART Board Audio (SBA-L) USB speakers to the RCA connector pod.
Connect these speakers to the projector connection panel using a dual-channel (left and
right) RCA plug-to-3.5 mm audio connector cable (included with the speakers).
l
The composite video connector and associated dual channel audio inputs on the RCA
connector pod are for input only. These RCA jacks don’t provide an output signal.
C H A P T E R 4
Integrating other devices
33