9
About the Buttons on the Feeder
Button/Light & Action
Button/Status Indicator
What It Means
Top light pulses green
Operating on battery and
battery is sufficient.
Top light pulses red
Operating on battery and
battery is getting low.
Power:
Turn feeder on/off: Press and hold for
about 3 seconds until it beeps and flashes.
Top light is solid green
Running off of the AC
adapter.
Volume:
Press and release for desired volume
(Mute, Low, Medium, High).
None/listen to the sound
Selected sound will act as a
marker signal that precedes
the delivery of the treat.
Feeder Status Light:
Check hopper for treat
quantity.
Flashes red as the treats are
dispensed if the hopper is
low.
The feeder is running low on
treats (less than 1/4 to 1/2
cup left).
Power + Volume:
Recalibrate the feeder: If the feeder repeatedly
dispenses more than 5-6 treats, the unit needs
recalibration. Empty all treats out of the hopper
and press the manual button multiple times
until the feeder is completely empty. Make sure
the lid is on the top of the feeder. Hold the top
and middle button until you hear a beep.
Beeps, red and green light
flicker (for 30 seconds).
The power light will begin to
slowly pulse again indicating
calibration complete.
The sensors may need to
recalibrate if you see too
many treats dispensed.
Manual Feed:
Pair the feeder to a remote. Remote and feeder
are paired at the factory. You will only need to
pair the feeder to a new remote or a second
remote.
See section ‘Pairing a remote
to the feeder’.
For a remote to trigger a
feeder it must first be paired
to the feeder. New remotes
may be paired to the same
feeder. One remote may also
be paired to up to three
different feeders.
