9880022300-EN-180714.doc
7
EN
■
PSC MECHANICAL COOKING END PROGRAMMER
■
Allows programming interruption of cooking for a certain amount of time (maximum 2
hours).
Programmed operation: Turn the knob clockwise and select the desired cooking time.
The time count will start immediately. When time is up, the oven will automatically turn
off and an acoustic signal will mark the end of cooking.
Manual operation
For standard use of the oven without programming, turn the knob anti-
clockwise until the symbol
Please note: the oven does not work if the knob is at position
■
OR ANALOG COOKING END PROGRAMMING CLOCK
■
Besides showing the time, like the PSC it enables programming of the end of cooking
(up to 3 hours).
Be careful, the knob must always be turned clockwise for any regulation.
Setting the time: pull the knob lightly and turn it clockwise until the clock is set at the
current time. The clock runs even when the oven is off. Should power be cut, the clock
stops and must be readjusted when power is restored.
Programmed operation: turn the knob clockwise and select the desired cooking time.
The time count starts immediately. When the set minutes are up, the oven will turn off
automatically and an acoustic signal will mark the end of cooking. In order to turn the
acoustic signal off, bring the programmer to
O
rotating the knob clockwise. If you wish
to interrupt cooking before time is up, bring the programmer to
O
.
Manual operation:
Turn the knob clockwise until the hand reaches the manual symbol
The oven cannot work if the programmer is at O.
Summary of Contents for FI NB60
Page 29: ...9880022300 EN 180714 doc 29 EN...
