9880022300-EN-180714.doc
21
EN
■
REMOVING/MOUNTING THE SLIDING GUIDES (IF ANY)
■
If any, there are right and left sliding guides, which means they are not interchangeable
on both sides of the oven.
Proceed as follows to remove the sliding element from the lateral guide:
release the lateral guide from the oven together with the sliding element, as reported in
the paragraph above.
Place the guide on a flat surface. Now exert some pressure from top down near the
couplings in the sliding element
(fig. 1 step 1)
. When the couplings underneath come
out from the rod of the lateral guide, the sliding element has been released and can be
removed.
(fig. 1 step 2).
fig. 1
To place back the sliding element, position the upper hooks on the special rods of the
lateral guide. Always make sure the sliding element is moving towards the outside of the
oven when it is taken out. Now press the sliding element downwards
(fig. 2 step 1)
so
that it is coupled onto the lower rods
(fig2 step 2).
fig. 2
Summary of Contents for FI NB60
Page 29: ...9880022300 EN 180714 doc 29 EN...
