Smalvic FI NB60 Use, Installation And Maintenance Instructions Download Page 3

 
 

                                                                                       

9880022300-EN-180714.doc                     

 

 

EN

 

GENERAL WARNINGS 

 

 
This product is in compliance with the EU 2002/96/EEC Directive.  

The  crossed  out  "wheeled  bin"  symbol  on  the  appliance  indicates  that  at  the  end of  its 
life-span,  the  product,  as  it  has  to  be  separately  treated  from  domestic  waste,  must  be 
conferred  to  a  differential  collection  centre  for  electric  and  electronic  appliances  or 
redelivered to the dealer at the time of purchasing a new equivalent appliance. 

 

The user is responsible, at the time of disposal, for taking the device to the appropriate 
collection  point.  Failure  to  do  so  shall  result  in  punishment  in  accordance  with  the 
current legislation on waste disposal.  
Proper  differentiated  collection  is  necessary  so  that  the  obsolete  device  can  be  sent  on 
for environmentally friendly recycling, treatment and dismantling, in order to avoid any 
possible  negative  environmental  impact  or  health  risk  and  to  permit  re-use  of  the 
constituent materials. 
More detailed information about available systems for collection may be obtained from 
the local waste disposal services, or from the shop where the device was purchased. 

 

The manufacturer declines all civil or criminal liability in the event of poor or 
improper installation of the device. 

The manufacturer also reserves the right to many any necessary and useful amendments 
to its products without prior notice. 

 

Dispose of the various packaging materials in compliance with the applicable local 
Standards.

 

                                

 

Carefully read this instruction manual prior to installing or using this device, in order to 
have all the necessary information for correct installation, maintenance and use of the 
same. 
It is essential for this instruction manual to be kept together with the device for its entire 
life-span, also in case of transfer to other persons. 
This appliance has been designed for domestic use and only for the cooking and heating 
of food. Any other use, different to that indicated in this manual must be considered 
improper and consequently dangerous. 
The product is in compliance with the 89/109/EEC European Directive as it is destined 
to come into contact with food products. 
 

This household appliance is compliant with the provisions of the European 
Community Directives 
- LOW VOLTAGE DIRECTIVE – 2006/95/EC 
- ELECTROMAGNETIC COMPATIBILITY DIRECTIVE – 2004/108/EC 

 

The product identification data is stated on the relevant plate applied on the front of the 
oven. 

The plate must never be removed. 

 

Installation must only be carried out by qualified staff in compliance with the local 
regulations in force and following the indications in this manual. 
Important: do not lift or pull the oven with your hands. 

Summary of Contents for FI NB60






























Reviews: