Smalvic FI NB60, Use, Installation And Maintenance Instructions

Page: 4 / 29

9880022300-EN-180714.doc
4
EN
In case of malfunctioning, disconnect the appliance from the electric mains (do not pull
the power supply cable to disconnect the plug) and contact the authorised original spare
parts technical after-sales centre.
Do not, in any case, attempt to repair the device.
Correct use of the oven
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance. - The use
of the device is only intended for adults, keep children out of reach.
- The appliance produces heat both in the functioning phase and due to inertia, even
when just turned off. Do not touch parts inside the oven during these phases and limit
contact with the external parts. Keep children away from the appliance when operating.
The accessible parts can become very hot.
- To insert or extract containers or accessories from the oven, always use suitable
protective gloves.
- Use only containers able to resist to high temperatures
- Do not leave the appliance unattended during cooking operations that may release
greases or oils that may catch fire.
- Never cover or lean on the walls or lower part of the oven, with sheets of aluminium or
other objects such as pans or trays that could damage the product.
- Do not use the oven to store objects when it is not in use, otherwise damage could be
caused to both the oven and the objects when the appliance is switched on.
- Do not sit on or place weight on the open door and do not hang weights on the handle
as to do so could damage the product and cause malfunctions.
- Before maintenance or cleaning, unplug the oven and, if just used, wait for it to cool.
- Pay attention to the flow of air that leaves the oven when the door is opened when the
same is hot.
- Do not use jets of steam for cleaning, which could reach and damage electrical parts.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Attention, this appliance must be earthed in compliance with the standards in
force.
For installation of the oven see the “installation instructions” chapter
Correct use of the oven
- Pre-heat the oven for the strictly necessary time only
- Open the door only when necessary to avoid unnecessary heat losses
- Keep the gaskets clean and efficient to avoid heat dispersion which can cause damage
- Always turn off the oven when no longer in use
- To reduce the formation of condensate owing to the humidity in food, it is always
necessary to pre-heat the oven before introducing the foodstuffs. However formation of
condensate on the door glass or on the walls of the oven does not compromise its
functioning and will tend to disappear with the cooking.