![Smalvic CU 36P OE/ISPH Instruction Manual Download Page 13](http://html1.mh-extra.com/html/smalvic/cu-36p-oe-isph/cu-36p-oe-isph_instruction-manual_1294769013.webp)
13 9880023200-CU 36P NEUTRO 120312
Although, to determine if a cleaning product is safe, test a small
inconspicuous area using a very light pressure to see if the surface may
scratch or discolour. This is particularly important for porcelain enamel, highly
polished, shiny, painted or plastic surfaces.
ABNORMAL OPERATION
Any of the following are considered to be abnormal operation and servicing is
required. Do not use the appliance under these conditions:
- Burner flame with yellow tips.
- Soot on pan bottom.
- Difficult burner ignition.
- Burners fail to remain lit.
- Burner will flame out.
- Difficulty on turning gas valves.
- “
Fan
” Red Light
C
on control panel lighted, it means Cooling Fan not
working. See fig. Control Panel, page 31, VEFSGEL65S and VEFSGGL65S
NOTES:
Control regularly the correct functioning of Top Surface gas valves, oven gas
thermostat and selector switch.
In case of abnormal functioning of these devices, you must immediately
call a qualified technical assistance service.
■
OVEN DOOR
MOD: Oven Gas Range – Oven Dual Fuel Range
TO REMOVE OVEN DOOR
1) Fully open the oven door.
2) Insert a metal Locking Pin (B) in the Locking Hole (A) on each of the
hinges, see figure 11.
3) Grasp the door by the sides toward the back. Raise the front of the door a
few inches and make sure the Locking Pin (B) is locked by the door hinge.
This will prevent the hinge from snapping closed when the door is
removed. (There will be some spring resistance to overcome because of
the hinge being locked). When the front of the door is high enough and
hinges are locked, you will be able to lift the hinges to clear the slots
4) Pull the hinges out of the slots in the oven front frame.