![Smalvic CU 36P OE/ISPH Instruction Manual Download Page 12](http://html1.mh-extra.com/html/smalvic/cu-36p-oe-isph/cu-36p-oe-isph_instruction-manual_1294769012.webp)
12 9880023200-CU 36P NEUTRO 120312
Burner operational Notes, fig. 08A:
-
A properly adjusted burner with clean ports will light within a few seconds.
If using natural gas the flame will be blue with a deeper blue inner cone.
-
If the burner flame is yellow or is noisy the air/gas mixture maybe incorrect.
Contact a service technician to adjust.
-
With LP gas, some yellow tips on the flames are acceptable. This is
normal and adjustment is not necessary.
-
If soot is noticed on pan bottom, contact a service technician to adjust.
-
If the control knob is turned very quickly from HIGH to LOW, the flame may
go out, particularly if the burner is cold. If this occurs, turn the knob to the
OFF position, wait several seconds and relight the burner. Refer to LOW
SETTING VALVE ADJUSTMENT chapter to adjust LOW setting, if
needed.
-
The flame should not extend beyond the edge of the pan, fig. 08B .
■
MAINTENANCE
MOD: Oven Gas Range – Oven Dual Fuel Range
CLEANING SAFETY
Turn off all controls and wait for appliance parts to cool before touching or
cleaning them. Do not touch the burner grates, oven inner surface or
surrounding areas until they have had sufficient time to cool.
Clean appliance with caution. Use care to avoid steam burns if a wet sponge
or cloth is used to wipe spills on a hot surface. Some cleaners can produce
noxious fumes if applied to a hot surface.
RANGETOP GAS BURNERS
Take off the removable parts and put them in soapy warm water for 10
minutes. Stubborn soils can be removed by using a
nonabrasive pad or a plastic scouring pad, then rinse making sure that
all openings are free of dirt, fig. 09.
ATTENTION:
After cleaning the burner cap, on top surface gas burners,
make sure to place the burner cap in the right position, figure 10.
SURFACE AND OVEN COOKING CAVITY CLEANING
This is easily done using a damp cloth and a non-abrasive detergent,
wipe using a soft dry cloth. For stainless steel parts with stubborn soils, use
only plastic scrubbing pad or a sponge with vinegar and warm water.
Because of many new cleaning products introduced in the marketplace each
year, it is not possible to list all products that can be safely be used to clean
this appliance. Read carefully the cleaner manufacturer’s instructions to be
sure the cleaner can be safely used on this appliance.