SMA Solar Technology AG
5 Installation
Installation Manual
SB13_21TL-IA-en-65
23
5.2 Mounting the Inverter
Additionally required mounting material (not included in the scope of delivery):
☐ 2 screws suitable for the weight of the inverter and the mounting surface
☐ 2 washers suitable for the screws
☐ If necessary, 2 walls plugs suitable for the mounting surface and the screws
Procedure:
1. Ensure that no cables are laid in the wall which could be damaged when drilling holes.
2. Align the wall mounting bracket horizontally on the wall and use it to mark the position of the
drill holes.
3. Fasten the wall bracket on the wall with suitable mounting material.
4. Hook the inverter into the wall mounting bracket,
ensuring that it cannot slide sideways out of the
bracket.
5. If local requirements stipulate additional earthing or equipotential bonding, carry out additional
earthing on the enclosure (see Section 6.3.3).
6. If no additional earthing or equipotential bonding
is required, secure the inverter to the wall mounting
bracket with the M6x12 screw to prevent it being
lifted off.
7. Ensure that the inverter is securely attached.
Risk of injury when lifting the inverter, or if it is dropped
The inverter is heavy (see Section 12 "Technical Data", page 60). There is risk of injury if the inverter
is lifted incorrectly or dropped during transport or while being fixed to the wall mounting bracket.
• Keep the inverter horizontal during transport.
