ABOUT THE SLEEP CYCLE (cont.)
HOW TO KNOW THE ALARM IS SET
When the alarm is set,
appears on the screen. If SLEEPTRACKER® is not used to monitor your sleep
for 24 hours or more, the alarm must be reset by going to the alarm, go to ALARM mode and pressing
and holding GLO until reappears. Hold GLO until disappears to turn off the alarm function.
GL
O
SET
MODE
SLEEPTRACKER
3)
Press these buttons to
set the hour, minutes,
and AM/PM/24-hour.
Please Note: GLO will not backlight
the screen in the ALARM mode.
1)
Press
MODE
to go to the
ALARM mode.
5)
Press
MODE
until it stops
blinking to save your
new settings.
2)
Press and hold
SET
until the
hour digit blinks.
4)
Press
SET
to go to mintues
or AM/PM/24-hour.
10
