21
Function and Control
4.2.6 Other Function
(1) Auto button
when you press this button,it will enter auto mode,indoor motor in auto fan speed,Indoor fan run and louver motor stop. Press
the auto button,unit will be off.
(2) Filter cleaning
Indoor motor fan run 600 hours ,unit will show CL to notice filter cleaning.The CL is off after turn off unit
(3) Health
Indoor healthy function start when push healthy button.
(4) Dry
Unit will run in cooling 10 min after set up dry function.
(5) Saving energy
Indoor will show in ECO after unit run in energy saving mode.
(6) Low temperature heating
Press "MODE" and "+" button at the same time in heating mode,it will show LA.
(7) Environment temperature
push temperature button,it will show environment temperature 5s and the setting temperature.
(8) Outdoor power
Power on,outdoor power is off.
(9) When unit is on except for fan mode,outdoor power supply input high frequency.
(10) Entering off mode or fan mode,outdoor power is off after 4 minutes.
(11) 1W Standby.
4.3.7 Display
(1) Basis display,Power on,it maintain 2s-3s display,and then power light is on.
(2) The running light is on when remote controller turn on unit,and indoor show the running mode.
(3) If turn off the light button,and all display is off.
(4) It displays as original mode after setting sleeping function.
