Skyway IR Auto Tracking/ High Speed PTZ Camera Installation & User Manual Download

Page: 28 / 46

24 / 42

Screen 22: Alarm Settings

Option

Value

Explanation

ALARM ACT

NONE

No action is performed on alarm.

AUTO SCAN

The camera performs an auto scan on alarm: the camera
performs a 360 horizontal scan operation.

RANDOM SCAN

The camera performs a random scan on alarm: the camera
performs a random 360° scan, pausing for approximately 2”
every 142°.

FRAME SCAN

The camera performs a frame scan on alarm: the horizontal scan
is performed in the SET SCAN limits.

PRESET

The camera goes to related preset on alarm.

PATTERN 1

The camera performs pattern action 1 on alarm.

PATTERN 2

The camera performs pattern action 2 on alarm.

PATTERN 3

The camera performs pattern action 3 on alarm.

PATTERN 4

The camera performs pattern action 4 on alarm.

CRUISE

The camera performs a cruise on alarm: the camera runs a cycle
consisting of up to 30 preset positions.

TRACKING

The camera performs tracking action on alarm.

PRESET N TRA

The camera goes to related preset and starts tracking function.

CRUISE TRA

The camera performs a cruise with tracking on alarm.

ACTIVATE AUX

OFF

Turn on/off the relay output after the alarm.

ALARM CONTACT

ON, OFF

This determines the current AUX gives output actions or not. It is
related to the above setting

ACTIVATE AUX

Table 18

If an alarm is triggered during any automatic operation of the camera (Pattern, Auto Tracking, etc.), the operation
in progress is stopped and the camera executes the action that has been set in the

ALARM ACT

menu:

In the event of Preset action, the camera moves to the preset position. Then, if the option

PARK ACTION

set to execute an action, the action will be executed after the

PARK TIME

period has expired.

In the event of "

PATTERN, AUTO SCAN, RANDOM SCAN, FRAME SCAN, CRUISE

" actions, the action is

executed by the camera permanently and can only be stopped by one of the following actions: any
command sent by a controller or any alarm event.

4.5.4.2. ADDR

SETTING

Screen 23: Address Setting

The soft address is the address programmed by built-in software. The hard address is the address programmed by the
DIP Switch.

Option

Value

Explanation

ALARM NUMBER 1

ALARM

ACT

NONE

ACTIVATE

AUX OFF

ALARM

CONTACT

OFF

BACK
EXIT

ADDR SETTING

ADDR

TYPE

HARD

ADDR

HARD

255

ADDR

SOFT

<EDIT ADDR SOFT>
BACK
EXIT

Summary of Contents for IR Auto Tracking/ High Speed PTZ Camera















































Search results

Summary of Contents for IR Auto Tracking/ High Speed PTZ Camera

Reviews:

Related manuals for IR Auto Tracking/ High Speed PTZ Camera

Brands by name

Popular brands

Skyway IR Auto Tracking/ High Speed PTZ Camera, Installation & User Manual

Search results

Summary of Contents for IR Auto Tracking/ High Speed PTZ Camera

Reviews:

Related manuals for IR Auto Tracking/ High Speed PTZ Camera

Brands by name

Popular brands