23 / 42
Screen 20: Dome Settings 2
Option
Value
Explanation
ALARMS
Alarm submenu (refer to
Section 4.5.4.1
).
ADDR SETTING
Address setting submenu (refer to
Section 4.5.4.2
).
PASSWORD
Password submenu (refer to
Section 4.5.4.3
).
WINDOWS BLANKING
Windows blanking submenu (refer to
Section 4.5.4.4
).
HEATER SETTING
Heater use submenu (refer to
Section 4.5.4.5
).
CRUISE SETTING
Cruise programming submenu (refer to
Section 4.5.4.6
).
TRACKING SETTING
Automatic tracking submenu (refer to
Section 4.5.4.7
).
TIME
Set the clock of the ptz camera (refer to
Section 4.5.4.8
).
EVENT
Set the event of the ptz camera (refer to
Section 4.5.4.89
).
IR SETTING
Set the IR lights(refer to
Section 4.5.4.810
).
Table 16
4.5.4.1. ALARMS
Screen 21: Alarms
The camera has 2 alarm inputs and 1 alarm outputs. The actions defined by the user may be associated to an alarm.
Option
Value
Explanation
ALARM NUMBER
1, 2
This option allows selecting one of the 2 alarm inputs.
SEQUENCE (SECS)
1 ~ 250
Duration time (in seconds) of the action related to each alarm
when several alarms occur at the same time.
<ALARM SETTINGS>
This shows detailed setting of the current alarm.
CLEAR SET
This submenu is used to delete the alarm programming (see
below).
DWELL TIME<SECS>
0 ~ 30
The duration of related alarm output.
Table 17
Alarm Settings Submenu
This shows detailed setting of the current alarm.
ALARMS
ALARM
NUMBER
1
SEQUENCE (SECS)
1
<ALARM SETTINGS>
<CLEAR SET>
DWELL TIME<SECS>
0
BACK
EXIT
DOME SETTINGS 2
<ALARMS>
<ADDR SETTING>
<PASSWORD>
<WINDOWS BLANKING>
<HEATER SETTING>
<CRUISE SETTING>
<TRACKING SETTING>
<TIME>
<EVENT>
IR SETTING
BACK
EXIT
