14 / 42
Screen 4: Display Setup
Option
Value
Explanation
PRESET LABEL
ON/OFF
Show or hide presetting labels (max. 64).
ZONE LABEL
ON/OFF
Show or hide zone labels.
ZOOM ON/OFF
Show or hide zoom labels.
P/T DEG
ON/OFF
Show or hide camera pan/tilt degrees. The coordinates refer to the
monitor center.
DOME LABEL
ON/OFF
Show or hide dome labels.
CRUISE TRACKING
ON/OFF
Show or hide the message CRUISE TRACKING.
EVENT LABEL
ON/OFF
Show or hide event label.
TIME
ON/OFF
Show or hide time info.
DATE
ON/OFF
Show or hide date info.
COMPASS
ON/OFF
Show or hide direction of current PTZ.
LABEL POSITION
ON/OFF
Label positioning submenu (refer to
Section 4.5.2.1
).
TEMPERATURE ON/FF
Show or high the camera temperature.
Table 3
4.5.2.1. LABEL
POSITION
The labels may be positioned where required on the screen.
Screen 5: Label Position
To establish a position:
1)
Point the cursor to the label to be moved by moving the joystick vertically.
2) Press
OPEN
3) Symbol
“
■
” will appear.
4)
Position the entire label in the chosen position using the joystick.
5) Press
OPEN
.
6)
Repeat this operation for each label.
7)
Point the cursor “
►
” to
SAVE
and press
OPEN
.
4.5.3. MAIN PROGRAMMING MENU (DOME SETTINGS 1)
In the first level menu, select
<DOME SETTINGS 1>
and the corresponding submenus to access the main menus.
ZONE
DOME
PRESET
COMPASS
EVENT
CRUISE
SAVE
RESET
P/T DEG
ZOOM
TIME DATE
DISPLAY SETUP
PRESET LABEL
ON
ZONE LABEL
ON
ZOOM
ON
P/T
DEG
ON
DOME LABEL
ON
CRUISE TRACKING
OFF
EVENT
LABEL
ON
TIME ON
DATE ON
COMPASS
OFF
<LABEL POSITION>
TEMPERATURE
OFF
BACK
EXIT
