22 / 42
Screen 18: Zone Label
3)
Point the cursor to the first character to be used and press
OPEN
. Point the cursor to “
BACKSPACE
” to delete it.
4)
After writing the text, point the cursor to
OK
and press
OPEN
to save and go back to the main screen.
EDIT ZONE submenu
This includes all the operations needed to program a zone.
1) Press
“
►
” on “
EDIT ZONE
”.
2) Press
OPEN
to confirm.
3)
Use the joystick to point to the required position to define the left limit of the zone to be created.
4) Press
OPEN
to confirm. Press
CLOSE
to cancel the operation.
5)
Use the joystick to point to the required position to define the right limit of the zone to be created.
6) Press
OPEN
to confirm. Press
CLOSE
to cancel the operation.
7) Press
CLOSE
to cancel the operation.
4.5.3.7. CLEAR
SET
Screen 19: Clear Set
This menu is used to delete the settings of several elements at one time.
Option
Value
Explanation
CLEAR ZONES
This option is used to delete all the zone settings.
CLEAR PRESETS
This is used to delete all the Presets.
CLEAR PATTERNS
This is used to delete all the pattern settings.
RESTORE FACTORY
DEFAULT
This performs a total reset and loads the default settings. The
operations may take a few seconds (approximately 20
seconds): the message “
WAIT
” will appear on the monitor.
Table 15
4.5.3.8. PRESET
NUMBER
This option can be used to set the number of Presets which may be used.
1)
Point the cursor to “
►
” “
PRESET NUMBER
”.
2) Press
ENTER
.
3)
Move the joystick vertically and select “
256
”.
4) Press
ENTER
to confirm.
Do not change the setting (“256”).
4.5.4. SECONDARY
PROGRAMMING MENU (DOME SETTINGS 2)
In the first level menu, select
<DOME SETTINGS 2>
and the corresponding submenus to access the other menus.
CLEAR SET
CLEAR ZONES
CLEAR PRESETS
CLEAR PATTERNS
RESTORE FACTORY DEFAULT
BACK
EXIT
ZONE NUMBER
1
ZONE LABEL
1 - - - - -
0 1 2 3 4 5 6 7 8 9 Y Z y z
A B C D E F G H I J K L M N O P Q R S T U V W X
a b c d e f g h I j k l m n o p q r s t u v w x
OK
CANCEL
SPACE BACKSPACE
