IDP-280/IDP-290 - Hardware Guide
© ORBCOMM Proprietary 33 T212, Version 03
Figure 32 Cable Grommet
Figure 33 Red Gasket
5.
Using a soldering iron and solder, tin the wires and solder them to the connector
solder cups (Figure 34) as per the proper pinout.
Figure 34 Wires and Solder Cups
6.
Ensure the O-ring is in place over the connector body as shown in Figure 35.
Figure 35 O-Ring over Connector Body
7.
Slide the coupling ring over the connector body and give it a twist to prevent it from
falling off.