GSM-EGS5-T,TU_User_Manual EN v1-03
Page 1 of 2
SIM card reader
GSM-EGS5-T; GSM-EGS5-TU
1.
Introduction
Modem in industrial metal aluminum case which is
suitable for installation into a control cabinet.
Modem has two serial ports (RS232 and USB) with
adjustable watchdog. The modem is equipped with a
GSM module Cinterion EGS5. Modem is suitable for
fast implementation in devices that require remote
communication. It also includes the monitoring of
communication with the master device (watchdog), both via RS232 serial port as well
as the USB.
2.
Package Content
1 pc GSM modem with module Cinterion EGS5
1 pc 2 pin connector 3.5 mm
3.
Recommended acesories
3.1
Antenna
GSM-ANT11K
2dB, Whip jointed antenna, without cable
GSM-ANT01S
5dB, magnetic, cable 3m
GSM-ANT51S
9dB, magnetic, cable 3m
GSM-ANT07S
9.5dB (log–per), cable 10m
3.2
Power Supply
GSM-PWR12
Power supply adapter into socket 230V
AC
/ 12V
DC
, 1A
GSM-PWR1
DIN rail mounted supply module 230VAC / 12VDC, 1.25A
GSM-75-DIN
Plastic DIN rail holder
Note: GSM-75-DIN is suitable for DIN rail mounting inside of a cabinet.
3.3
Cables
HW-11.99.6218
CANON MD9-FD9 (connected as an extension), length 1.8 m
HW-11.99.8718
USB 2.0 AB (mini USB to modem), length 1.8 m
4.
Technical specification
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
Power
Supply
(PWR)
Voltage DC
8 V
DC
12 V
AC
12 V
30 V
V
DC
/
AC
max. power.
consumption
during phone call
1.2 W
W
Standby
connected to
GSM network,
no phone call
12 V
DC
22 mA
V
mA
POWER
supply
connector
2-pin removable screw terminal block, pitch 3.5 mm (PWR),
type –TU additionally mini USB B
Power
supply via
USB
Only
GSM-EGS5-TU
version
5 V
DC
100 mA
Ingress
Protection
IP
40
Temperatu
re
Strage
tSTG
-40
+85
°C
Operating
tA
-30
+65
°C
Humidity
Operating
95
% RH
Dimen-
sions
Width
W
54
mm
Height
H
24
mm
Length
L
82
mm
Weight
0.103
kg
5.
Modem parameters
Parameter
Description
GSM, GPRS 12
850/900/1800/1900 MHz
(GPRS 86 kbps)
JAVA
See manuals for module EGS5
Antenna connector
Device - SMA (F), 50 Ohm.
Internet services
TCP/IP via AT (UDP, HTTP, FTP, SMTP, POP3)
USB 2.0
Mini USB; USB2.0, USB driver Silabs.
NOTE: Autobauding is not available!
USB is based on internal USB<->SERIAL convertor inside of device
from modem’s ASC1 port.
RS232
CANON 9F; 300 to 921600 bps fix bit rate.
Autobauding is available. Factory setting is 115200 baud, 8 data
bits, no parity, 1 stop bit
HW watchdog
HW Watchdog is available for both RS232 and USB.
Note: Watchdog setting is available only via RS232.
6.
Documentation
USB
driver, a list of
AT
commands and other information, visit the
www.seapraha.cz
,
type “GSM-EGS5-T” into the search box.
In the Name field, enter the text
sea
. In the Password box, type
siemens
.
7.
Hardware
7.1
Power supply and it’s indication
Supply voltage is connected to terminals PWR and
must be in the range of 8-30 V
DC
or 12-30 V
AC
. The
polarity is therefore irrelevant. The device is
protected against overvoltage and has a built in
refundable SMD fuse. If the external fuse is needed,
use 1.25 A fuse at V
CC
line. GSM-EGS5-TU can be
powered directly from the USB connector.
LED
COLOR
Meaning
Located
next
to
connector
PWR
green
dark
… device is not supplied, or internal
power convertor is out of order
light
… device in operation state
7.2
SIM card reader and GSM state indication
Insert the SIM card into the holder (cut corner first, contacts
down - towards the inscription SIM). The correct insertion is
indicated by mechanical click noise. Push gently and release to
remove the SIM card.
Below the SIM card holder is located the LED which indicates
status of GSM.
LED
COLOR
Meaning
Located
bellow SIM
card holder
SIM
blue
Device state indication.
dark
… device failure; Device was switched of
using AT command
blinking 1:1
… device starting up
1 short blink per 3 seconds
… device operational
7.3
Antenna
The antenna is connected via SMA connector. The device is fitted with SMA female.
The connected antenna must have SMA male. The impedance is 50 Ω.
7.4
Connectors RS232 and mini-USB
To communicate with the modem is designed interface RS232 and USB. The device
includes a female connector RS232 and mini-USB. The modem can be controlled using
both interfaces, for setting up of the watchdog function is possible to use only RS232
interface.
Factory default baud rate for communication with the modem is 115200 bps, 8 data
bits, no parity, 1 stop bit.
7.5
DIN rail mounting
If you need to place the device into the switchboard on DIN rail, screw the plastic
holder GSM-75-DIN drilled hole in the side of the modem.
8.
Warranty
General warranty period is 24 months after purchase, when eventual malfunction device will
be repaired free of charge in SEA spol. s r.o. while shipping to SEA is paid by customer and
SEA pays for shipping back to customer.
The warranty does not cover any damage caused by wrong use which does not comply the
technical specifications and user instructions and any accidental damage (e.g. by water,
lightening etc.).
SEA spol. s r.o. has NO RESPONSIBILITY for any damage, lost, costs and any other problems
direct or inducted, caused by device malfunction from any reason.
In case of incompleteness or any damage in the packaging it is necessary to inform SEA spol. s r.o. immediately (within
five days).
CE Declaration of conformity
in accordance with the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC (R&TTE) and Directive
2011/65/EU (ROHS).
We
SEA, spol. s r.o., Dolnoměcholupská 21, CZ 102 00 Praha 10,
ID
: 47117931 (
manufacturer
)
declare under our sole responsibility, that product
GSM modem with serial ports RS232 a
USB
type
GSM-BGS3,
GSM-EGS5, GSM-EES3
is in conformity with the following standards:
health and safety:
EN 60 950-1:2005+A1:2009 EN 60 950-1:2006+A11:2009+A1:2010+A12:2011
EMC:
ETSI EN 301 489-1
ETSI EN 301 489-7 v1.3.1
radio frequency:
EN 301 511 v 9.0.2
The last two digits of year in which the CE marking was affixed:
13
Place of issue:
Praha
Name:
Ing. Vladimír Rosůlek
Date of issue:
25.11.2013
Grade:
director
