02
03
General information
Thank you for purchasing
iMAX B8+
charger. You have purchased high quality
product made by SKYRC. Reliable SMD technology, outstanding performance
and flexibility, high level of safety features and last but not least their easy
handling and the new technological features you will have a lot of fun with it.
Optimized user interface
When charging or discharging, B8+ has an "AUTO" function that sets the feeding
current automatically. Especially for Lithium batteries, it can prevent the over
charging that can lead to an explosion by user's fault. Every program in the unit
is controlled with mutual links and communication for every possible error for
maximum safety. These can be set at user's option.
It provides most convenient balance charge port for Lithium batteries, the u
Maximum Safety
Delta-Peak Sensitivity: The automatic charge termination program works on the
principle of the Delta-peak voltage detection.
Auto-charge current limit: When charging NiCd or NiMH at "AUTO" current mode,
you can set the upper limit of charge current to avoid from high current charging.
This is very useful when charging the low impedance and small capacity
NiMH battery in "AUTO" mode.
Capacity Limit: The charging capacity always calculated by multiple of the
charging current and time. If the charging capacity exceeds the limit the
process will be terminated automatically when you set the maximum value.
Temperature Limit: The temperature of the battery on charging will rise by its
internal chemical reaction. If you set the limit of temperature the process will be
expired forcibly when the limit has reached.
Processing Time Limit: You can also restrain the maximum process time to pre
vent from any possible defect.
Input Power Monitor: To protect the car battery using as input power from being
damaged the voltage of it always monitored. If it drops below the lower limit the
process will be ended automatically.
High-power and high-performance circuit
B8+ employs the circuit that has maximum output power of 150W. As a result it
can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium
batteries with maximum current of 7.0A. Furthermore the cooling system is so
efficient that can hold such a power without any trouble of running the CPU or the
operating program.
niversal
connector, pitch 2.54mm,compatible for Align XH, Kokam/Graupner/Robbe
Packs from 2 cells to 8 cells.
General information
Maximum Circuit Power Chart
The actual amount of charge current feeding to the battery is automatically be limited
to 150 Watts, so not to exceed the charger's maximum rated charging power.
The maximum discharge power is approximately 20 Watts. The discharge current
delivered to the charger is limited by charger's internal thermal sensor for maxi
mum discharge current. If the internal temperature over 80 Celsius, the charger
will be cut off and "TEMP OVER ERR" will show on the LCD. In this case, please
decrease discharge current.
Please refer following chart for maximum charging/discharging current.
Maximum Circuit Power Chart
20W
20W
