These programs are for charging or discharging NiMH(Nickel-Metal-Hydride) or
NiCd(Nickel-Cadmium) battery commonly used for R/C model applications. To alter the
value at the display, press
Start/Enter
key to make it blink then change the value using
Inc> or <
Dec key. The value will be stored by pressing
Start/Enter
key once.
To start the process, press
Start/Enter
button for more than 3 seconds.
This program simply charges the battery using
the current you set. In
Aut
mode,You need to
set the upper limit of charge current to avoid from
higher feeding current that may damage the bat
tery. Because some batteries of low impedance
and small capacity can lead to the higher charge
current by the processor at automatic charge
mode. But in
Man
mode, it will charge the bat
tery with the charge current you set at the display.
Each mode can be switched by pressing Inc> and
<Dec button simultaneously when the current
field is blinking.
The screen displays the current state of charging.
To stop the process, press Batt type/Stop key
once. The audible sound indicated you the end of
process.
DEC INC
Batt type
stop
Start
Enter
`>3seconds`
elapsed
time
charge
current
battery
voltage
discharged
capacity
battery
type
NiMH/NiCd battery program
NiMH/NiCd battery program
Charging NiCd/NiMH battery
Set discharge current on the left and final voltage on
the right. The discharge current ranges from 0.1 to
5.0A and the final voltage ranges from 0.1 to 30.0V.
to start the process, press Start/Enter key for more
than 3 seconds.
The screen displays the current state of discharge.
You can alter the discharge current by pressing
Start/Enter key during the process. Once you
change the current value, store it by pressing
Start/Enter button again. To stop discharging press
Batt type/Stop key once. The audible sound
indicates you at the end of process.
DEC INC
Batt type
stop
Start
Enter
`>3seconds`
battery
type
elapsed
time
charge
current
battery
voltage
discharged
capacity
DEC INC
Discharging NiCd/NiMH battery
Discharging NiCd/NiMH battery
20
21
