VARIOUS INFORMATION DURING THE PROCESS
Press INC or DEC during the charging or discharging process to
view further pertinent information on the LCD screen.
Final voltage when the program ends.
Input voltage.
Safety timer ON and permissible charging time.
Capacity cut-off ON and capacity limit.
Voltage of each cell of the battery pack when
the battery is connected with balance lead.
Internal/External Temperature
Temperature probe is necessary for getting
external temperature
Percentage of growing capacity and average
cell voltage of the battery pack.
Real-time status: battery type, battery cell
count, charge current, battery pack total
voltage, elapsed time and growing capacity.
Cut off temperature.
LP3s 1.5A 12.24V
BAL 000:50 00022
4.07 4.06 4.11 V
0.00 0.00 0.00 V
Fuel= 90%
Cell= 4.10V
INC
INC
LP3s 1.5A 12.24V
BAL 000:50 00022
Ext. Temp: 45°C
Int. Temp: 37°C
DEC
Temp Cut-Off
50C/122F
DEC
DEC
DEC
DEC
DEC
End Voltage
12.6V(3S)
IN Power Voltage
12.56V
Safety Time
ON 200min
Capacity Cut-Off
ON 5000mAh
e660
17 ·
e660
· 16
Lithium Battery Program
(LiPo/LiFe/Lilon/LiHV)
Lithium Battery Program
(LiPo/LiFe/Lilon/LiHV)
R:3SER S:3SER
CONFIRM(ENTER)
LP3s 1.5A 12.14V
BAL 000:50 00022
START/ENTER
BATTERY CHECK
..............................
R:3SER S:3SER
CANCEL(STOP)
[ END: FINISHED ]
12.6V 1000mAh
[ Time: 00: 15: 32 ]
12.6V 1000mAh
Charging Status Monitor
During charge process, real-time status will be
shown as seen on the left.
The charger is detecting the battery cell.
R shows the number of cells detected by the
charger and S is the number of cells set by you
on the previous screen.
If the two numbers are not identical, press
STOP to go back to the previous screen to
recheck the number of cells of the battery pack
that you set before going ahead.
Program Complete
Once the battery is fully charged, the screen will
read “END: FINISHED” and the charger will
emit a ringing sound. The charger also displays
battery voltage, charging capacity and elapsed
time.
Program Stop
During the charging process, press STOP to stop the charging process.
*
