e660
01 ·
Introduction
Thanks for purchasing SkyRC e660 AC/DC Input Professional Balance
Charger/Discharger/Power Supply. Though this unit is simple to use,
and you may even have years of experience on chargers, SkyRC still
recommend you to read the entire instruction manual completely and
attentively. Doing such reading can assist you to quickly become familiar
with its operations & new functions. It is, therefore, highly recommended
that you read through the Operating Instructions, Warning and Safety
Notes before attempting to use this new charger for the first time. SkyRC
hopes you will have pleasure of using it for years.
This new e660 charger also support PC control software (Charge
Master) and firmware upgrade. Besides that, e660 is able to power DC
equipment such as tire sander, LED pit light and motor checker, etc. The
new features and functions will be listed and explained in detail in the
following pages.
SkyRC e660 is a high-performance, micro processor control charge/
discharge/power supply with battery management suitable for use with
all current battery types. It is with integral equalizer for six-cell Lithium-
Polymer (LiPo), Lithium iron phosphate (LiFe), Lithium-ion (LiIon) and
Lithium High Voltage (LiHV) battery with max. 6A charge current and
60W charge power. This charger can be powered by 11-18V DC or 100-
240V AC power source via the built in switch-mode power supply.
Please BE SURE to read the INSTRUCTIONS, WARNING and SAFETY
NOTES before using this charger for the first time.
Mishandling batteries and battery chargers is extremely dangerous,
which may cause fire and explosion.
Table of Contents
This device is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
Do not recharge non-rechargeable batteries!
WARNING:
Introduction
Special Features
Warning and Safety Notes
Program Flow Chart
Operation
Operating Program
Lithium Battery Program
(LiPo/LiFe/Lilon/LiHV)
NiMH/NiCd Battery Program
Pb Lead-Acid Battery Program
DC Power Supply
Battery Memory Set and Call Out
System Setting
Battery Voltage Meter
Battery Resistance Meter
Warning and Error Message
Using the Charge Control Software “Charge Master”
The Set Contains
Recommended Accessories
Specification
Conformity Declaration
Commonly Used Terms
Warranty and Service
01
03
06
10
12
13
15
18
24
27
28
30
32
33
34
35
36
37
38
39
40
41
