e660
23 ·
e660
· 22
NiMH/NiCd Battery Program
NiMH/NiCd Battery Program
NiMH/NiCd Cycle Mode:
The e660 makes cycling of NiMH/NiCd batteries easy. The process of
discharging and recharging (cycling) can be performed automatically
with one simple step and will improve the performance of NiMH/NiCd
batteries. We strongly recommend cycling any battery that has been
discharged and stored for a period of time. This will increase the
remaining usable battery life and also improve the battery performance.
After selecting the correct battery type, use the
INC or DEC button to select the “CYCLE” mode.
The Cycle Mode gives you two cycling options:
“DCHG>CHG” or “CHG>DCHG“. The “DCHG>CHG”
option will first discharge the battery and then
recharge the battery.
The “CHG>DCHG” option will first charge the
battery and then discharge the battery. If this
screen does not show your desired cycling
option, press the START button once and this
setting will begin flashing. Use the INC or DEC
button to change this setting.
Pressing the START button again will cause the
cycle count to begin flashing. Use the INC or
DEC button to change this to the number of
cycles you want the e660 to run. The e660 can
cycle the battery a maximum of 5 times
consecutively.
Press and hold the START button for 3 seconds
to start the Cycle Mode.
NiMH CYCLE
DCHG > CHG 2
NiMH CYCLE
CHG > DCHG 5
Once cycling has commenced, the charger will
display the following real-time information:
battery type, charging/ discharging current,
battery voltage, elapsed time and charged/
discharged capacity. You will also see “D>C“ or
“C>D“. This will indicate which cycling order you
have chosen.
Either “D“ or “C“ will be flashing. This flashing
indicates which part of the cycle is currently
being executed.
NiMH 0.5A 9.6V
D > C 004:04
00034
Once the cycling process is complete, the screen will read “END:
CYCLE” and the charger will emit a ringing sound. The e660 will display
the charge/discharge capacity for each cycle. Using the + and - buttons,
you can scroll through this data for each cycle.
Additional NiMH/NiCd Process Information:
During the NiMH/NiCd battery charging/discharging process the e660
can display a variety of information. Using the INC or DEC buttons, you
can also view the following information:
NiMH Sensitivity
D.Peak 4mV/CELL
Ext. Temp
42 C
Int. Temp 37
C
In Power Voltage
12.56V
Delta Peak Voltage
Sensitivity setting
External*/ internal
temperature
Safety Time
ON 200min
Safety timer
setting
Input Voltage
Temp Cut-off
50
C
Temperature
cut-off
Capacity Cut-Off
ON 5000mAh
Capacity limit
setting
This function is available by connecting optional temperature probe(SK-600040-01),
which is not included in the package.
*
