FUSELAGE REAR & FRONT
Before joining the fuselage it is necessary to tidy up the
servo wires. Make sure wires are secure and will not
touch the tailpipe.
Check operation of landing gear and doors.
Now fit the fins to fuselage.
Slide tailpipe into rear section. The pipes are marked
for left and right.
The pipes have 2 studs to be bolted to engine mount.
The rear of pipe have a “stopper” that will press against
the tail cone. Adjust the length of stud to make sure
pipe fit snug and no play is felt. The tail cone is a “twist”
fit.
Route 4 servo wires along inner skin of rear fuselage.
Speed brake air tubing and LG + Door air tubing will all
be factory fitted. Route to front of rear fuselage.
The main tanks will be factory installed.
Install JR DS8511 steering servo. Bolt with 4 x M3 bolts and lock nuts.
Centre servo and install pushrod.
P-17
Assembly & Operation Manual
Photo 44
Photo 45
Photo 46
Photo 47
Photo 48
Photo 49
Photo 50
Photo 51
Photo 52
