Assembly & Operation Manual
SWING WING
We recommend that the wings be removed for transport.
The wings must be in the
swept back position to remove or refit to fuselage.
To remove and refit the wing it
is required to loosen 3 bolts only and actuator fitted to wing. The 3rd bolt will appear as
wing is extended. The reason for removing wing for transport is that the plastic fitting
on actuator may be damaged if hit in transport. Later models are supplied with alumi-
num fitting.
WINGS
NOTE:
Make sure to have some sort of protective foam on the work bench. This will
protect the paint surface from unwanted dents. Assemble both wings simultaneously.
There are TWO options : Normal wing or scale wing. If you chose the normal wing
without flaps , spoilers and slats, you may skip this step. No work is required on wings.
Mark √ each step.
Remove and mark servo covers and inspect plywood. Use dremel to clean out
some glue and ply to make sure servos will fit well.
P-12
Photo 17
Photo 15
Photo 16