Locate all items needed to complete flaps. Fit 2 L-shape servo brackets to DS8911 servos.
Connect servos and do radio setup.
Locate flap belcranks (p25). Remove the horn from belcrank.
Fit the flap belcrank horn to servo horn. Drill 2 holes and secure with bolt and loctide.
Insert belcrank wire through sleeve. Fit to slot in flap.
Mark location of servo and drill pilot holes.
Fit horn assembly over belcrank wire and secure with allen key. Use locktide.
Check operation of flap. Max deflection 45 deg.
REPEAT ALL STEPS FOR OTHER WING.
P-14
Assembly & Operation Manual
Photo 28
Photo 29
Photo 30
Photo 25
Photo 26
Photo 27
