81
11. Specifications
12. Trouble-shooting guide
39746
39745
Item
Specification
RF-Modulator
RF-Connector
75W, IEC 169-2, Female/Male
Frequency
470 ~ 860MHz
Output Service
CH21 ~ 69
TV standard
PAL G/I/K selectable by Menu
Power Supply
Input Voltage
90 ~ 250VAC, 50/60Hz
Type
SMPS
Power Consumption
Running: Max. 22W, Standby: 8W
Protection
Separate internal fuse.
Physical Specification
Size (W x H x D)
340 x 60 x 265 mm
Weight (Net)
3.3Kg
* Specifications and functions may be changed for improvement without notice in advance.
Problem
Possible Causes
What to do
No display
Receiver is not connected to mains
Connect receiver with mains and
switch on
No sound, no video,
but clock will be indicated
or -- – in display
DVR is in stand-by mode
Switch on receiver
No video, no sound
SAT dish is not correct installed
Check dish installation and realign
No or bad signal
Check menu and submenu settings for
transponder search
Check cables and connectors
LNB defect
Change LNB
No remote control function
No batteries
Change batteries
Remote control wrong straighten
Adjust the remote control in direction of
receiver
DVR is in stand-by mode
Switch on receiver
Lost PIN
Contact hotline or your dealer
Clock indication wrong
Wrong clock setting
Set right clock by menu
On few programs will be received
Dish is not correct installed
Re-align the dish and restart transponder
search
Only DVR 9600
CI module no function
Wrong installation of CI module
Reject CI module and insert again
Schwarzer Bildschirm bei codierten
Programmen
Wrong working CI module. Smart card
not working.
Reject CI module and insert again. Turn
around smart card and insert again.
39746_BDA_0604_eng #38 29.06.2004 14:22 Uhr Seite 81
