66
9. Main menu
39746
39745
VI-1. LNB Setting
The Low Noise Blockdown Converter (LNB) amplifies the signal received by
the satellite dish and lowers the frequency of the signal. The signal is then
fed from the LNB at the dish via cable to the DVR.
For the LNB Settings, move the cursor to Installation item and press button.
Then, move the cursor to the LNB Setting item and press
button.
A. Satellite Name
Press the
button to display the Satellite List. The Satellite name list is
put in alphabetical order. Select one of the preprogrammed satellites that
correspond to the value of the antenna. If the desired satellite name is not in
the list, then select Others.
B. Tuner Select
Select a tuner for channel searching from the selected satellite.
C. Connection Type
If two tuners share one LNB (page 55) select Loop Through. If a service is
being recorded, the other tuner can receive only the signal of the same band
and polarity as being recorded in this configuration.
If the tuners are connected to separated LNBs (or Twin LNB), select
Separated. There is no restriction as in the Loop Through configuration.
D. LNB Frequency
Select the L.O. Frequency set to antenna.
The LNB Frequency of 5150, 9750, 10600, 10750, 11475 MHz or Universal
can be selected by using the
and
buttons.
NOTE.
If the Universal LNB is selected, both 9750 and 10600 MHz are
supported at the same time, and therefor the 22 KHz tone setting is not
required.
E. LNB Power
Select LNB power “ON” for internal and “OFF” for external.
F. 22 KHz
If you are using a 22 KHz tone switch box, make 22 KHz tone switch enable
or disable to select LNB or antenna.
G. 12 V
Use it if the switch box is controlled by 12 V DC.
H. DiSEqC 1.0
The DVR is designed to be DiSEqC 1.0 compatible. This allows multiple
antenna to be connected to the DVR at the same time. If you are using two
or more fixed antennas or LNBs, then it is recommended to use a DiSEqC
1.0 switch.
Select from 1 of DiSEqC to 4 of DiSEqC, Mini A, Mini B or Disable according
to the option or the configuration of DiSEqC switch box or antenna.
I. Channel search
To go to Channel Search menu directly from LNB Setting menu, press
button at this item.
VI. Installation
39746_BDA_0604_eng #38 29.06.2004 14:22 Uhr Seite 66
