57
8. Getting started
39746
39745
Press the
Power
button to operate the DVR from the STANDBY mode. Now, the Info Box will appear
for a given time and disappear. By pressing info button, the Info
Box will remain on the screen. The
display time of the Info Box is adjustable in the
System Setting
menu of the
Main menu
.
If the current broadcast has EPG (Electronic Program Guide) with it, press the guide
button to see not
only the current channels but also other channels EPG without any time constrains.
Also, press
button to reserve and save the current service and to watch the broadcast
automatically when it starts.
IMPORTANT
: Before taking charge of your new DVR, some important technical settings are essential.
• First, press the MENU
button on the RCU to make the Main Menu
appear.
• Go to the LNB Setting item in the Installation menu and press OK
button.
• Choose the right parameters for Satellite Name, Tuner Select, Connection
Type, LNB Frequency, LNB Power, 22KHz, DiSEqC 1.1 and DiSEqC 1.0.0
• Set the Motorized DiSEqC1.2 and the USALS items according to your
antenna, LNB and satellite settings. If the right Satellite Name and LNB
Frequency were not found in the list, call the dealer for satellite
information.
If you are not sure, please use LNB frequency setting 9750 /10600 and
put LNB power to “on”.
• Then, press
button at Channel Search item and go to the Channel
Search menu.
• Set the Search Mode to the Auto. (Manual, Advanced or SMATV Search)
• Select the Start Search... item and press OK
button.
• The search procedure will take a while.
Press OK
button when the searching process is finished to
confirm and save the new channel list.
• For further information, please refer to the LNB Setting part of MENU
OPERATIONS in this manual.
39746_BDA_0604_eng #38 29.06.2004 14:22 Uhr Seite 57
