70
9. Main Menu
39746
39745
VI-7. Factory Setting
All the stored data can be reset just like it was manufactured. The factory
setting has two steps. The first is to reset the channel data and other system
configurations except Motorized DiSEqC1.2 setting. The second is to reset
the parameters of Motorized DiSEqC 1.2.
VI-8. Transfer Firmware
It is used to transfer DVR firmware to other DVR for upgrading the DVR.
Notes: Please proceed this menu with connecting the DVR of same model
and same specification.
VI-9. Transfer Data to Other IRD
It is used to transfer DVR Data such as service information to other DVR for
upgrading the DVR.
Notes:
Please proceed this menu with connecting the DVR of same model
and same specification.
VI-10. Firmware Upgrade
At this menu, you can download the latest DVR software from Satellite.
The TP details are prepared.
For OTA (Over The Air Upgrade), it takes up to 20 minutes to download soft-
ware from the Satellite. To start OTA, press OK
button at Start item.
You can check the IRD (DVR) version and refer the calendar.
VII-1. IRD Status
Check the DVR’s system information here. It shows the
• System ID,
• Loader Version,
• Device Version,
• Application Version
• Last Update.
VII. Information
39746_BDA_0604_eng #38 29.06.2004 14:22 Uhr Seite 70
