Skymaster DVR 9200, Operating Instructions Manual

Page: 14 / 40

52
9. Main menu
39743
Connect the receiver. Then press the “ ” key on the remote operation or the “Standby” key on the front
screen of the receiver. The main menu will now appear on the monitor screen. The main menu displays
different sub menus of the receiver. You can select these sub menus with “CH
”, “CH ” and the number
keys on the remote operation. When a menu is selected, its colour changes. Press “OK” to access the
concerned sub menu.
1. Installation
The Installation menu permits you to set the antenna and to change the
device settings. To reach the Installation menu you must enter the password
(basic setting: “0000”). Use “Ch
”, “Ch ” on the remote operation and
then press the “OK” key to go to the next step. You can go back to the
previous menu either with the help of “Back” or “Menu”.
1.1 Easy installation
The receiver can be set up for the initial start up through “Easy Installation”.
Execute the following five steps:
Language setup: Select your preferred language.
Antenna select: Select your satellites such as, for instance, Astra or
Hotbird. You will find the other satellites under the “Other” option
(Page 53
).
Antenna adjust: You can adjust the satellite antenna with the help of the
signal strength display of your satellite key.
Search typ:
“FTA-ADD/ALL-ADD”: Add new content (free / all channels) at the end of
the list.
“FTA-OVERWRITE/ALL-OVERWRITE”: Overwrite all data received from
the satellite thus far, and replace it with the new programme list.
Channel being searched: Searches existing channels automatically.