Assembly & Operation Manual
ELEVATOR
NOTE:
Use some protective foam on the work bench to protect the paint surface from
unwanted dents. Mark √ each step.
ñ
Assemble elevator belcrank assembly.
ñ
Secure the assembly to moving stab. Use 4 bolts with washers and lock nuts.
ñ
Secure 4 L
-
brackets to the 2 MKS elevator servos.
ñ
Fit metal servo horn and center servo using radio. Synchronize the servos.
ñ
Fasten the 2 alluminium elevator horns to the elevato. Secure with bolts and nuts.
ñ
Secure the elevator belcrank mechanism to the ply plate. Then secure the ply plate
to the slots in rear of fuselage. Bolt to position.
ñ
Check operation and movement of elevator.
ñ
Make up 2 elevator pushrod bearing mounts. Same length. Install pushrods.
ñ
Run servo wires away from tailpipe.
ñ
Connect to temporarily to radio and check operation of elevator.
P
-
14
Photo 23
Photo 21
Photo 20
Photo 22
