Assembly & Operation Manual
LANDING GEAR
ñ
Gear is part of centre wing section.
ñ
Check operation of main gear and doors. All factory
fitted. Root all air pipes and servo wires neatly to front
of fuselage. Use quick disconnects.
ñ
With gear in centre wing it makes it easy to assemble
at flying field. Centre section can be left on fuselage.
FUEL CELLS
NOTE: Bad plumbing lead to flame outs. This will destroy your model. Please take your time
and do a good job.
ñ
Make sure clunk moves freely and reaches all corners of
inside of tanks.
ñ
Fit to main tank. Mark pipes for “inlet” and “outlet”.
ñ
Secure 2 saddle tanks in position. Saddle tanks will feed
main tank. The main tank will feed UAT.
ñ
Plumb tank using diagram on next page. Fill tank and
check for leaks.
ñ
Drain tank with turbine fuel pump and check no air. Bub-
bles in system until last drop is drained. A good plumbing
will secure good turbine operation.
P
-
16
Photo 27
Photo 32
Photo 28
Photo 29
Photo 30
Photo 31
