AIR SYSTEM:
You will need 2 x 2way and 1x 1way + sequencer for doors and brakes. You will
need 3 x 2 way for operating canopy and lock. All work done at factory.
ñ
Glue the air tanks (3) with silicon
ñ
Use quick connectors on fuselage joints to help
with break up of model.
ñ
Fit the 3 filler valves and 3 pressure gauges
onto epoxy tray in nose
ñ
Plumb the landing gear, door and brake system by using color air tubing. T all
same color tubing together until a single pipe emerge.
ñ
Fit electronic sequencers on tray.
ñ
Secure 3 x 2 way electronic valves. This will be for locking and opening
canopy. Canopy use sequencer to lock canopy in down position.
ñ
Air leaks can damage your model! Please do a thorough check for air leaks. Make
sure the system can hold pressure for at least an hour in the up and down position.
ñ
Do not rush this installation.
P
-
18
Assembly & Operation Manual
Photo 34
Photo 35
