EQUIPMENT INSTALLATION INTO F4
P22
Assembly & Operation Manual
ñ
Equipment installation is a personal venture. There is one golden rule: Do it as neat
and logical as possible! This will make fault finding and service of components easi-
er. The F4 basically consist of 7 circuits!
1.
Servo wires
2.
Power cables
3.
Data cables
4.
Pneumatic pipes
5.
Air pipes
6.
Fuel pipes
7.
RX cable / Satellite Receivers
Please try and separate these circuits as far as pos-
sible. It is advisable not to run RX cables near any
kind of electrical fields. Make all switches and filler
valves and charging sockets easy accessible. If you
use S
-
bus technology it will simplify installation.
ñ
The F4 will come out tail heavy if you do not plan
installation. It is very important to install all equip-
ment as far forward as possible.
ñ
Removable nose cone is available. Epoxy glass
nose formers are supplied as accessory tray.
ñ
I have installed all batteries in nose.
ñ
Make sure the servo wires is routed for the job!
.
Photo 44
