FCC Information
Consumer Information:
a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the bottom
of this equipment is a label that contains, among other information, a
product identifier in the format
US:AAAEQ##TXXXX.
If requested, this number must be
provided to the telephone company.
b) An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is
provided (i.e.,
RJ11C
) in the packaging with each piece of approved terminal equipment.
c) A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted by
the ACTA. A compliant telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
d) The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by
the total RENs, contact the local telephone company. [For products approved after July 23,
2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX
. The digits represented by ## are the REN without a decimal point
(e.g
., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.]
e) If this equipment AM-002
causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if
advance notice isn't practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe
it is necessary.
f) The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
g) Should you experience trouble with this equipment, please contact Skylink Customer
Support at 1-800-304-1187 for repair or warranty information. If the equipment is causing
harm to the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
h) Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do
not alternate or repair any parts of device except specified.
i) Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
j)
NOTICE:
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this model AM-002
does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your telephone company or
a qualified installer.
