8
IMPORTANT
The processing me changes for each product . Solid products should not be
processed without a liquid , because overhea ng may occur and therefore damage
the Cup seal
IMPORTANT
Never remove or replace the Cup with the Blender switched ON.
2.2.1 Placing the Cup
The Cup # 02 (Pic.01) has a simple system to be
fi
ed allowing an easy and safe placement .
Always remove or replace the Cup, just li ing and holding it
fi
rmly by the two handles.
2.2.2 Placing the Lid
The Cup # 02 (Pic,01)has a Lid # 01 (Pic.01) made of non toxic rubber providing an e
ffi
cient
seal during the process.
Make sure the Lid to be duly placed on the Cup , see picture below .
2.2.3 Placing the Cap
The Cap # 09 (Pic.01) may be used either to watch the process or to add ingredients.
To remove it turn it clockwise un l to be loose , then li it.
3. Opera on
3.1 Star ng
To start the Blender just press the ON/OFF Switch # 08 (Pic.01) to posi on “I”.
To stop the blender press the ON/OFF to posi on “O”.
3.2 Opera on Procedures
Remove the Lid # 01 (Pic.01) with the Cap # 09 (Pic.01) out of the Cup # 02 (Pic.01)
With the Blender switched OFF introduce inside the Cup # 02 (Pic.01)
fi
rstly the liquid
products and only a er, introduce the more consistent products.
Press the Lid with the Cap as explained on item 2.2.2 and 2.2.3.
33
