background image

                                            1 

Skye Instruments Ltd. 

Skye Instruments is based in the UK and we are very proud to be celebrating being in business since 1983. 
Our products are designed and built in the UK. We have a very wide product base and our sensors & 

systems are used for plant & crop research; micro-climate, global climate change studies; environmental 
monitoring and controlled environment installations. 

Products include light sensors & systems, weather monitoring sensors, automatic weather stations, plant 
research systems, soil and water research systems. 

Feel free to contact us via our e-mail, or any of the methods below. Please click on the icons to browse the 

sites, or search for the usernames. 

 

 

 

      

 

 

 

Have a Smartphone? Scan this QR code to access our website for more information about your product: 

 

 

 

 

Please be aware that the information in this manual was correct at time of issue, and should be 100% 

relevant to the accompanying product. We take great pride in our ever-evolving range of products, which 
means that sometimes the product may change slightly due to a re-design. If you have any queries, please 

do not hesitate to contact our technical team by any of the methods above.

Skye Instruments Ltd

 

Skye Instruments Ltd

 

@skyeinstrumentsltd

 

@SkyeInstruments

 

Skye Instruments Ltd

 

Skye Instruments Ltd

 

Summary of Contents for SKP 220V












Reviews: