4
2.4 Connecting to the Terminal
Please also ensure that on replacing the lid that the wires or silica gel pack do not get trapped
in the sealing lip.
Connecting wire ends to the terminal is intended to be easy. Above each terminal block there is an opening
and a metal clip inside. Use a small flat-bladed screwdriver (supplied) to press down firmly on the metal clip
and insert the exposed wire into the terminal access located on the side of the terminal block. Once satisfied
that the wire is inserted deep enough, release the pressure, and the wire will be firmly secured in the terminal.
Please see the figures below. Using this system ensures that all wires have a constant pressure exerted on
them, maintaining a good connection.
