-
２２
-
VGA resolutio
n
：
select the corresponding resolution of monitor to set .
PIP Config
：
PIP Config is picture in picture function, with setting of background
and foreground access .The first selection frame is the foreground access number,
the second is the back ground access number Through mouse clicks PIP shortcut
icon button or by the PIP button of remote and panel to start PIP function .Click
the mouse right button or the Ch1~Ch4, QUAD button to exit PIP function
HDD overwrite
: cover and not cover. Cover means it can continue to record when
HDD be full
3.9.2 Password
setting
：
Enable . Disable .Enable setting means to use password, disable setting
means to cancel password.
Time setting
：
if enable choosed, time is also need to setup, if disable choosed,
the settled time is invalid.
Modify password
：
to modify password as per the instruction System
Password
3.9.3Date&Time Setting
To setup date time as per the instruction System
Date Time
Note
：
it is not permit to modify time and date for recording(include manual .
Schedule. Motion detection and alarm).
3.9.4 Default
Default configuration
：
to default all Para as per the instruction System
Default,
3.9.5 Upgrade
To upgrade software as per the instruction System
Update, main board and panel
board are selectable.
main board
Copy
update.img
to USB:\,insert device USB into the port, then choose main
board from target.
panel board
Copy AP.bin toUSB: \,insert device USB into the port, then choose panel board
from target.
Logo
To upgrade logo by providing two photos for PAL and NTSC, setup names and
sizes as logo_p.jpg &logo_n.jpg and 720x576&720x480, copy them toUSB:\,insert
device USB into the port, then choose logo from target.
