-
１５
-
Record----Image Para it is available to set brightness, contrast, and saturation and channel
name of the picture.
3.3.3 Manual Rec
Starting Rec: Record---Manual Rec, choosing the record channel as “V”, press
the key OK and the relative channel start to record. On the preview page, you
can see the record sign of the relative channel, on the Record---Manual Rec
interface you can see the channel has changed to Rec or RETR.
Note: setting “V”, show the user use Manual Rec, whether starting to record or
not, HD play a key role. When the HD is out of using, being not formatted or being
saturation and the covering isn’t settled, system will not start to Manual Rec.
Stopping Rec: Record---Manual Rec, choosing the relative record channel as “X”, press
the key OK, the relative channel will stop Manual Rec at once, on the Record---Manual
Rec interface you can see the channel has changed to IDLE or TRAN separately.
REC States: Record---Manual Rec interface can display States and system four states,
they are IDLE, REC, TRAN and RETR .and respect leisure, and recording, cyber
sending and recording add cyber sending.
3.3.4 Schedule Rec:
Starting to record: Record---Schedule, choosing the need setting channel number,
then setting the schedule time, gridding respect seven days and twenty-four hours, red
respects recording will start in the setting time.
Stopping Rec: Record---Schedule, choosing the need setting channel number, then
setting the schedule time, gridding respect seven days and twenty-four hours, green
respects recording will not start in the setting time.
Mouse operation: press the left key of the mouse you can do choosing/cancelling
scheduling. Press OK key you can save the setting.
Board and Remote Control operation: when changing motion frame to time list, the key
menu of Board or Remote Control can do choosing/cancelling schedule in the gridding. Up,
Down, Left and Right key can choose gridding in motion. Press Enter key back from time
list .when back to OK key, press OK key to save setting.
Note: you can set time from starting time to end time by pressing mouse left key
to draw between starting time and end time and then release the mouse.
When channel message is settled, you can use Apply to key to copy the message to others
