-
19
-
recording , the playback will stop automatically .So sometimes like this
problem will be happened, Audio playback without audio output
;
or the
audio disappear suddenly during playback, because audio recording start
at the same time
2.
Only select file display then audio display can process, Time display can’t
support audio display
System support
Switch turn right
(
close to the power
)
to select PAL
;
turn left
(
close to internet port
)
to select
NTSC
Note
:
NTSC file playback just can do under the NTSC system, otherwise it can't
display the natural picture, the same with PAL
3.5 Alarm
:
3.5.1 Alarm type
:
Alarm type setting
:
Alarm
Sensor Type use for setting alarm input, select “X”
means low-voltage alarm effective. “V” means high-voltage alarm effective, need
corresponding with the actual connecting alarm
Note
:
When not connect alarm, the alarm system default for the high-voltage
input signals
3.5.2 Motion detection recording
:
Motion detection sensitivity and regional settings
:
Alarm
Motion Area, switch
the channel need for setting, then select the sensitivity and enter sub-menu to set
motion detection area, click the OK button to save configuration information after
setting
Motion detection area setting
:
Alarm
Motion Area ,click set menu to enter area
setting page, by mouse drag to select the motion detection area .The whole
picture was divide up 16x12 small panes, red means that area need for checking