-
２１
-
valid. Click ok button to save when finish it
Panel and remote operation: Switch the shift
Note:
1. The default time of alarm is 24 hours each day
2. Can also set the time of motion detection and video loss
3.6 PTZ
PTZ menu use for setting as 485 parameter, there are 4 protocols are available: b01,
Samsung, pelco -d and pelco-p
Please refer to the attachment of PTZ connection method.
3.7 PTZ Ctrl
PTZCtrl use for PTZ controlling.
Control method
：
aspect. Focus. Lens .And supports the speed adjustment function.
Mouse operation: by the mouse right button to click the corresponding button
Panel and remote operation
：
Switch the shift cube by the left and right button, press
the enter button to make these function work .Click the stop button to exit directly
3.8 Log
Click log menu to enter log page, Select the relevant log type and start-end time, click search
button, then the system will get back to the relevant log information page
Logo Type
：
Alarms and Operation .
Support max 1024 piece log, it will cover the first log to record when exceeding.
3.9 System
3.9.1 Configure
System
Config provide the system config information, config including: Device ID,
AUTO switch, PIP config, VGA type. HDD overwrite etc.
Device ID
：
Choice for remote operation of equipment .
AUTO switch
：
Auto Switch with Time and Skip parameter, after setting ,Through
mouse clicks Auto switch shortcut icon button or by panel, QUAD button of remote
to start/stop the auto switch function .Auto switches is the corresponding picture
switch full screen automatically in the Time interval, choice skip button to skip the
no video input channel or not, select V to skip the no video input channel, select X
to display all channels pictures whatever video input or not
