-
２０
-
motion detection, green means not need check
Mouse action .click the left mouse button to select / cancel the motion detection
area, click right mouse button to save and exit after setting, click the middle
button to cancel the setting and exit.
Panel and remote operation: panel or remote menu button can select /cancel
motion detection area, Top ,bottom, left, right button can shift to select grid, click enter
button to save setting and exit, click stop button to cancel setting and exit.
After setting current channel, please use “apply to” to copy all the same setting to
other channels.
3.5.3Alarm Association
：
Alarm Related
：
Alarm
Alarm Related, use for setting alarm input when system
needs to be done, Optional approach as follows
1. Spring the appointed channel recording, It will record when the trigger
condition setting is ok,
it will stop record if the settings expired
2. Trigger buzzer, and provide input trigger for alarm after the alarm output
also continued to set the output time, the range is 1-99 seconds
3. Trigger alarm output, and provide input trigger for alarm after the alarm
output also continued to set the output time, the range is 1-99 seconds
Note
：
Here also can set motion detection and video lost operation related.
Notes: please test the alarm input by a wire to connect input port with the ground,
please refer to the attachment of alarm input defines.
Motion detection linkage
：
Alarm
Alarm Related, use for setting alarm input,
Optional approach as follows
1. Spring the appointed channel recording, It will record when the trigger
condition setting is ok,
it will stop record if the settings expired.
2. Trigger buzzer, and provide motion detection trigger conditions after the
buzzer also continued to set the output time, a range of 1-99 seconds.
3. Trigger alarm output, and provide motion detection trigger conditions
after the alarm output also continued to set the output time, a range of
1-99 seconds.
3.5.4 Alarm setting
：
Alarm time setting
：
Alarm
Schedule, switch the alarm which need for setting,
then set the valid time range, grip marks 7days 24 hours, blue mark it can't timing
recording at the corresponding time . Blue means the alarm is invalid, red means
