5
SerVice anD inStallation Manual
2.2
2.2
wireless Load Pins
wireless Load Pins
Mounting
1. Mount the load pin to the boom tip or block by
replacing the pin of the wedge socket. The load
pin is directional and must be oriented correctly
to indicate load accurately. Install the pin so that
the bracket embraces the wedge socket and
prevents pin rotation.
2. Secure the load pin in place with a cotter pin or
other suitable keeper device.
2.2a
2.2a
Load Pin and anti-two-
Load Pin and anti-two-
block Transmitter gS009
block Transmitter gS009
1. Determine the transmitter mounting position.
a. The pigtails to the load pin and the other
one to the anti-two-block must connect
easily without stretching or kinking at all
boom angles and working conditions.
b. The best radio communication is obtained
when there is a direct unobstructed line
of sight from the transmitter to the display.
c. The transmitter antenna must not be in
contact with any metal object.
d. The transmitter antenna should point to
the left of the boom when viewed from the
cab; it should not point directly to, or away
from, the display.
2. Weld the mounting blocks where required.
3. Mount the load pin transmitter on the mounting
blocks.
Pigtail
Handle wire
Figure: load pin
AA
10
K1
1
LIN
E PU
LL
Wedge socket
Load pin
Hook ball or block
Figure: load pin - installation on a single part block
AA10K11
LINE PULL
Wedge socket
Load pin
Cotter pin
Pigtail
Boom tip
Figure: load pin - installation at boom tip
Anti-two-block pigtail
Load pin pigtail
Mounting
block
Figure: the load pin and anti-two-block transmitter GS009
IMPORTANT!
do not pull on a load pin
by the pigtail, pull on the handle wire.
!
!
IMPORTANT!
do not weld in proximity to
sensor/transmitters.
!
!
Note: When installed at the boom tip the lot
number can be read right side up and the “line
pull” arrow points down towards the block. When
installed at the hook ball or block, the lot number
can be read upside down and the “line pull” arrow
points up towards the boom tip.
SkyAzul, Equipment Solutions
www.skyazul.com
301-371-6126
